All Too Often, We Are Doing Soldering We Tend To Neglect The Air Quality Around The Bench..
The End Result Is That We Are Breathing In Those Very Fumes From The Solder, Flux And What All That Are Potentially Damaging To Our Lungs And Our Sinuses..
Good Exhaust Fans Can Be Very Pricey And Take Up A Lot Of Room On The Bench..
This Simple Solution Can Be Assembled In Short Order And Will Provide You A Very Efficient And Very Localized Fume Extractor Which Will Draw The Fumes Out Of The Work Area And Clean Up Your Local Environment.
Lets Head On Over To The Next Page And See How This Is Assembled
Parts Needed Begin With The Ubiquitous Candy Tin, Some 9 Volt Batteries, Charcoal Filter, Some Screening, Computer Fan And 9Volt Connectors..
READY ? HERE GO
Thanks For Visiting Our DIY For Everybody Site
Hope That You Enjoy This And Many Other Projects To Be Found On Our Site
