Do You always look for something out of the ordinary ? You know, that certain “something” which will set your decor off from those around you ? Look No further
Six simple steps and you are done
First Step is to gather your materials..
Materials needed :
1″ wide 1/4″ thick slat wood about 5.5 feet long -20
10″x10″x 1.5″ – wooden board
20″x20″ wooden board.
Nails
Drill
Sander
Paint of choice
Step 2:
Prepare the slats by sanding them..
Step 3 ; Cut Circles
Now you have to cut circles for the top and bottom of the lamp.
I didn’t have a 20″ x 20″ board, so I glued two 10″x10″and connected it with another board for added strength.
Now draw a 20″ diameter circle and then draw an inner circle so you have a 2″ border. Cut the circle out. If you are using one board without attachments you can use the inner circle to cut the upper smaller circle.
Step 4: Assemble the component parts
NOTE: Make sure that you paint or finish the materials prior to assembly..After assembly, painting or staining the inside of the lamp is very difficult
For the complete set of instructions please visit : Instructables.com
Source: Instructables.com
Pictures: Instructables.com