Passive Solar heat boxes are becoming more examined by the EPA and many other “Save The Planet” organizations. The goal being to use Mother Nature’s energy which is free and abundant to provide power, heat and energy to anything else which needs energy ..
This build is simple and only uses some 2×4’s, polycarbonite sheeting, black paint, aluminum foil and silicone sealant
The builder claims significant temperature change from input to output ranging from 40 to 60 degrees..
This system could be invaluable in heating your basement or any other room in the house which runs cooler than the rest of the rooms.
Seems as if it would be great for that damp cellar..
Go to page 2 and see if you agree with us here at DIY For EverybodyHere are the directions from the builder :
Directions:
1. Build wood frame
2. Put aluminum foil on inside of back
3. Install wire screen 2″ above the foil
4, Cover the entire frame with polycarbonate to allow the sun to come in
hit the foil and reflect and concentrate the heat on the “black wire”.
5. Cut a hole at the top of the back wall and another at the bottom of the front polycarbonate wall.
6. Cut a vent hole to match each in your wall, be sure you use an AC vent that can be opened or closed seasonally.
7. If you want to control the speed of the air, install a fan to pull or push the air through.
And Now The Video.
